How To Change the Time In Your Panasonic Phone System
November 8, 2009
Daylight Savings time has come and some of you have been asking how to change the time in your Panasonic Phone Systems. Here it is:
How to change the time on your Panasonic telephone system:
1. Identify your system (NOT YOUR TELEPHONE) these instructions are
for the Panasonic KX-TD500 digital telephone system but they may work for yours as well.
2. Find and use the main phone on jack 01. You can determine if you
phone is jack 01 by pressing PROGRAM 99 on a display phone then
pushing the number 6 on the dial pad. The phone will read the jack
and extension number on the display. You must have a display
telephone on jack 01 to use these instructions.
3. Press PROGRAM * * followed by the system access code. The system
default code is 1234, yours may have been changed. Your display
should read USR-PGM NO >
4. Press SP-PHONE 3 times. Display reads: 3:15 PM 12 (Hour is
flashing)
5. Enter 2 digit hour. Display reads: 04:15 PM 12 (Hour is flashing)
6. Press FWD/DND button or press the softkey below -> on the display.
Display reads: 04:15 PM 12 (Minute is flashing)
7. Press Auto Dial/Store button. New time is stored.
8. Lift handset and hang up to leave programming mode.
Comments
Got something to say?
